Document Type : Research Paper

Authors

1 Department of Water Engineering, Faculty of Agriculture, Kermanshah Branch, Islamic Azad University, Kermanshah, Iran.

2 Department of Water Engineering, Faculty of Civil Engineering, Iran University of Science and Technology, Tehran, Iran.

Abstract

In the article, through the adaptive neuro-fuzzy inference system (ANFIS), a sensitivity analysis is conducted on the variables affecting the discharge capacity of the weir. To this end, the variables affecting the discharge capacity of labyrinth weirs are initially identified. Then, using these input parameters, seven ANFIS models are developed for conducting the sensitivity analysis. After that, the most optimal membership function number for the ANFIS model is chosen. In other words, by conducting the trial and error process, the best number of the membership functions in terms of time and modeling accuracy are selected. Then, the sensitivity analysis is performed for the ANFIS models and the superior ANFIS model is chosen finally. The accuracy of the superior model in both the validation and testing artificial intelligence (AI) methods is in an acceptable range. For example, the scatter index (SI), correlation coefficient (R) and the Nash-Sutcliff efficiency coefficient (NSC) for the model in the testing mode are obtained 0.049, 0.964 and 0.924, respectively. It should be noticed that the outcomes of the sensitivity analysis show that the ratio of the weir head to the weir crest and the Froude number are introduced as the most effective input parameters. Eventually, a computer code is proposed to estimate the discharge capacity of labyrinth weirs by this model.

Keywords

Akhbari A., Zaji A.H., Azimi H., Vafaeifard M., Predicting the discharge
coefficient of triangular plan form weirs using radian basis function
and M5’methods, Jo urnal of Applied Research in Water and
Wastewater 4 (2017) 281-289.
Azimi H., Heydari M., Shabanlou S., Numerical simulation of the effects
of downstream obstacles on malpasset dam break pattern, Journal of
Applied Research in Water and Wastewater 5 (2018) 441-446.
Azimi H., Bonakdari H., Ebtehaj I., Design of radial basis function-based
support vector regression in predicting the discharge coefficient of a
side weir in a trapezoidal channel, Applied Water Science 9 (2019)
78.
Azimi H., Shabanlou S., Ebtehaj I., Bonakdari H., Kardar S.,
Combination of computational fluid dynamics, adaptive neuro-fuzzy
inference system, and genetic algorithm for predicting discharge
coefficient of rectangular side orifices, Journal of Irrigation and
Drainage Engineering 143 (2017) 1-3.
Baylar A., Hanbay D., Ozpolat E., An expert system for predicting
aeration performance of weirs by using ANFIS, Expert Systems with
Applications 35 (2008) 1214-1222.
Bagheri S., and Heidarpour M., Application of free vortex theory to
estimate discharge coefficient for sharp-crested weirs, Biosystems
Engineering 105 (2010) 423-427.
Carollo F.G., Ferro V., Pampalone V., Testing the Outflow Process over
a Triangular Labyrinth Weir, Journal of Irrigation and Drainage
Engineering 143 (2017) 06017007.
Crookston B.M., Paxson G.S., Savage B.M., Hydraulic performance of
labyrinth weirs for high headwater ratios, In The 4th IAHR
International Symposium on Hydraulic Structures, Porto, Portugal
(2012) 1-8.
Crookston B.M., and Tullis B.P., Hydraulic design and analysis of
labyrinth weirs. I: Discharge relationships, Journal of Irrigation and
Drainage Engineering 139 (2012) 363-370.
Ebtehaj I., Bonakdari H., Zaji A.H., Azimi H., Sharifi A., Gene
expression programming to predict the discharge coefficient in
rectangular side weirs, Applied Soft Computing 35 (2015) 618-628.
Emiroglu M.E., and Baylar A., Inf luence of included angle and sill slope
on air entrainment of triangular planform labyrinth weirs, Journal of
Hydraulic Engineering 131 (2005) 184-189.
Haghiabi A.H., Parsaie A., Ememgholizadeh S., Prediction of discharge
coefficient of triangular labyrinth weirs using Adaptive Neuro Fuzzy
Inference System, Alexandria Engineering Journal 5 (2017) 21-29.
Hay N., and Taylor G., A computer model for the determination of the
performance of labyrinth weirs, 13th Congress of IAHR, Koyoto, Japan
(1969) 361-378.
Jang J.S.R., ANFIS: adaptive-network-based fuzzy inference system,
IEEE Transactions on Cybernetics 23 (1993) 665–685.
Khoshbin F., Bonakdari H., Ashraf Talesh S.H., Ebtehaj I., Zaji A.H.,
Azimi H. Adaptive neuro-fuzzy inference system multi-objective
optimization using the genetic algorithm/singular value
decomposition method for modelling the discharge coefficient in
rectangular sharp-crested side weirs, Engineering Optimization 48
(2016) 933-948.
Kumar S., Ahmad Z., Mansoor T., A new approach to improve the
discharging capacity of sharp-crested triangular plan form weirs,
Journal of Flow Measurement and Instrumentation 22 (2011) 175-
180.
Parsaei A., and Haghiabi A.H., Hydraulic analysis of compound open
channel, Journal of Applied Research in Water and Wastewater 2
(2015) 137-142.
Roushangar K., Alami M.T., Majedi Asl M., Shiri J. Modeling discharge
coefficient of normal and inverted orientation labyrinth weirs using
machine learning techniques, Journal of Hydraulic Engineering 23
(2017) 331-340.
Roushangar K., Alami M.T., Shiri J., Asl M.M., Determining discharge
coefficient of labyrinth and arced labyrinth weirs using support vector
machine, Hydrology Research 49 (2018) 924-938.
Taylor G., The performance of labyrinth weir. Ph.D. thesis, University of
Nottingham, Nottingham, England (1968).
Tullis B.P., Amanian N., Waldron D., Design of labyrinth spillways,
Journal of Hydraulic Engineering 121 (1995) 247-255.
Tullis B.P., and Young J.C., Chandler M.A., Head-discharge relationships for submerged Labyrinth weirs, Journal of Hydraulic Engineering 133 (2007) 248-253.
Wormleaton P.R., and Soufiani E., Aeration performance of triangular planform labyrinth weirs, Jour nal of Environmental Engineering 124 (1998) 709-719.
Wormleaton P.R., and Tsang C.C., Aeration performance of rectangular planform labyrinth weirs, Journal of Environmental Engineering 126 (2000) 456-465.