Golshan Moradi; Sirus Zinadini; Masoud Rahimi
Abstract
The research on membrane-based filtration technology for water treatment has expanded in recent years. Membrane fouling is a major challenge that decreases the permeability and decreases the lifetime and selectivity of the membrane. Recently, it was found that fouling mitigation and better control of ...
Read More
The research on membrane-based filtration technology for water treatment has expanded in recent years. Membrane fouling is a major challenge that decreases the permeability and decreases the lifetime and selectivity of the membrane. Recently, it was found that fouling mitigation and better control of membrane fouling can be attained under the application of the electric field. This paper provides an overview of the application of the electric field to the filtration process and its antifouling mechanism. Utilization of conductive polymeric membranes and application of electric field in membrane bioreactors are reviewed as well. The presented review demonstrates that the introduction of negative charge into the membrane surface via preparing conductive membranes or applying an external electric field onto the membrane surface suggests several advantages. These are fouling alleviation, better control of membrane fouling, an increase of membrane resistance to cake deposition on the membrane surface, and superior possible applications such as better salt rejection and antibacterial activity.
Kiran D D. Bhuyar; Sanvidhan G. Suke; Vilas S S. Sapkal; Rajendra S S. Sapkal
Abstract
Advanced water treatment methods are needed for good quality of lake water. In this study, the hybrid membrane bioreactor (MBR) and nanofiltration (NF) system was investigated to treat Ambazari lake water. The performance of the hybrid system was checked as removal efficiency of chemical oxygen demand ...
Read More
Advanced water treatment methods are needed for good quality of lake water. In this study, the hybrid membrane bioreactor (MBR) and nanofiltration (NF) system was investigated to treat Ambazari lake water. The performance of the hybrid system was checked as removal efficiency of chemical oxygen demand (COD), total dissolved solids (TDS), biochemical oxygen demand (BOD), and permeate flow rate (PFR). All parameters in the hybrid MBR-NF system were operated batch-wise for 5 h. The COD and BOD removal efficiencies were observed to be 95.67 % and 94.64 %, respectively. TDS removal efficiency was obtained to be 92.33%. The highest TSS removal efficiency was reported to be 36.0 % for airflow rates of 1.0 L/min. The pH variation at different airflow rates was found to be significantly low. Hence, from above information, we conclude that this hybrid system treated Ambazari lake water successfully. The treated water had high quality as good as potable water.
Zahra Rahimi; Ali Akbar Zinatizadeh; Sirus Zinadini
Volume 1, Issue 1 , March 2014, , Pages 13-17
Abstract
An innovative method based on the membrane bioreactor (MBR) technology was developed as a potential remedy for the water shortage. MBRs attracted much attention in the field of wastewater treatment and reuse. It is reported from many researchers that membrane bioreactor technology is feasible and an ...
Read More
An innovative method based on the membrane bioreactor (MBR) technology was developed as a potential remedy for the water shortage. MBRs attracted much attention in the field of wastewater treatment and reuse. It is reported from many researchers that membrane bioreactor technology is feasible and an efficient method for the treatment of wastewater. However, MBRs are faced to membrane fouling which lead to short membrane lifetime and increase operating costs. Here we modified polyethersulfone (PES) ultrafiltration membrane by blending of O-carboxymethyl chitosan/ Fe3O4 nanoparticles in a PES solution (14% polymer weight) and casted by a phase inversion process. Membranes with four different weight percentages of O-Carboxymethyl chitosan bound Fe3O4 magnetic nanoparticles (OCMCs-Fe3O4) to PES of 0.05, 0.10, and 1 wt. % were tested. The OCMCS-Fe3O4 nanoparticles were prepared by the binding of carboxymethyl chitosan (CC) onto the surface of Fe3O4 magnetic nanoparticles, which were prepared by co-precipitating method. The synthesized nanoparticles were characterized by the Fourier transform infrared (FTIR) technique. Moreover, OCMCS-Fe3O4 nanoparticales blend membranes were also characterized using scanning electron microscopy (SEM), and permeation tests. Antifouling performance was studied using activated sludge as a biological suspension and measuring the pure water flux recovery ratio (FRR). The 0.1 wt. % OCMCS-Fe3O4-PES membrane revealed the highest FRR value (89%). The results exhibited that addition of OCMCS-Fe3O4 nanoparticales lead to membranes with high pure water flux compared to the unmodified PES membrane.
